Skywalker roaster... | [292] |
Skywalker, the AL... | [214] |
Skywalker Roasts | [94] |
My first popcorn ... | [47] |
War on Farmers by... | [39] |
time to c1
|
|
scarter11 |
Posted on 11/06/2017 8:33 PM
|
1/4 Pounder Posts: 101 Joined: June 24, 2010 |
Man, why are low pressure gauges so much more expensive... |
|
|
scarter11 |
Posted on 11/08/2017 6:20 AM
|
1/4 Pounder Posts: 101 Joined: June 24, 2010 |
If my estimations of usable range are accurate, I think this gauge will give me the best resolution. https://www.grain...uct/18C803 This should have a range of about 0-3.6 PSI, correct? |
|
|
scarter11 |
Posted on 11/08/2017 12:07 PM
|
1/4 Pounder Posts: 101 Joined: June 24, 2010 |
OK. It appears that the gauge I posted earlier is not rated for explosive gases, and the one that is costs nearly 3 times as much (naturally). I'm thinking about going with a digital gauge. The one below has a resolution of .1 psi, So I would have 30 values between the min and max. And, it only costs $35. https://www.grain...uct/45MU05 I see no mention of the type of gas it is rated for. |
|
|
allenb |
Posted on 11/08/2017 7:19 PM
|
Administrator Posts: 3858 Joined: February 23, 2010 |
I prefer the old dial gauges to digital as I find it easier to see where the pressure will end up by how fast the needle is moving when a change is made to the needle valve. But I prefer a retro look anyway so it's a win-win for me. Plus an added bonus of no batteries. https://www.amazo...ge+0-5+psi Allen 1/2 lb and 1 lb drum, Siemens Sirocco fluidbed, presspot, chemex, cajun biggin brewer from the backwoods of Louisiana
|
|
Jump to Forum: |
Thread | Forum | Replies | Last Post |
---|---|---|---|
SR540 - Ideal profile (time and temperature) | Popcorn Popper roasting | 21 | 05/24/2023 1:40 AM |
inner bean dev, or total time? | Roasting Coffee | 5 | 06/22/2021 3:50 AM |
roast time questions | R1 Bullet Roaster | 1 | 02/06/2021 2:36 PM |
Roasted/Bagged/Setting up time limits | Roasting Coffee | 1 | 07/31/2020 1:10 PM |
Mean Time To Failure for FB Elements | Electric and Gas Heat Sources | 34 | 02/28/2020 1:30 PM |