Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.

Shoutbox

You must login to post a message.

03/04/2021 9:04 PM

I have been trying Scott Rao Hario V60 pourover this week. 1:17 and blooming with 2 parts water the first 45 seconds then splitting the rest into 2 pours. A little stirring is included. We like it.

louca

03/04/2021 11:35 AM

My brew ratio is 1:17 (exactly 59.5 g/L). That's roughly 8.5g per 5-oz cup.

Tom_Garrett

02/27/2021 9:29 AM

I'm looking to hire someone to teach/help me to find the best roast profile for the 3 types of coffee that grow on my farm in nicaragua. I live in LA, but but could go anywhere in so cal with my Behmor for a roasting lesson. Please contact me if you're in

BenKeith

02/17/2021 7:20 PM

When your wife thinks 30 grams for a 6 cup setting is strong, you learn to drink muddy water when you are making coffee for both of you.

snwcmpr

02/17/2021 8:32 AM

I use a rule of thumb of 60 grams per liter. 8 cups (1 liter, 32 oz) = 60 grams, 6 cups (3/4 liter, 24 oz) = 45 grams. 10 cups = 75 grams 12 cups = 90 grams

Shoutbox Archive

Forum Threads

Newest Threads

Hottop Project outsi...
SSR Control on Poppe...
TC4 Roasting App
Donate Bank Link not...
need help on using m...

Hottest Threads

TC4 with aArtisan...	[411]
Transparent Fluid...	[125]
TC4 Roasting App	[71]
RobotDyn AC Light...	[36]
Modifying DASH 14...	[35]

Users Online

Guests Online: 16

Members Online: 0

Total Members: 7,050
Newest Member: TopherM

In Memory Of Ginny

Donations

Donations Bank

Latest Donations
Anonymous - 5.00
Anonymous - 5.00
renatoa - 2.00
JitterzZ - 2.01
renatoa - 2.00

Oh no! Where's the JavaScript?
Your Web browser does not have JavaScript enabled or does not support JavaScript. Please enable JavaScript on your Web browser to properly view this Web site,
or upgrade to a Web browser that does support JavaScript; Firefox, Safari, Opera, Chrome or a version of Internet Explorer newer then version 6.

View Thread

Homeroasters - Home Roasting Coffee Community » DATALOGGERS - CONTROLLERS - RATE OF RISE METERS » Dataloggers/Controllers/Rate of Rise Meters

Who is here? 1 guest(s)

Using a TC4 with Artisan Roaster Scope
greencardigan	#1 Posted on 10/06/2017 8:41 PM
1 1/2 Pounder Posts: 1134 Joined: November 21, 2010	Hi all, I've put together a few basic tutorials showing the setup required in Artisan Roaster Scope to log and control using a TC4. Edited by JackH on 10/10/2017 9:53 AM


MaKoMo	#2 Posted on 10/07/2017 12:19 PM
1/4 Pounder Posts: 118 Joined: April 06, 2011	Excellent videos documenting Artisans and the TC4s PID capabilities (as expected the TC4 internal PID wins clearly;). I added links to both of your videos on my Artisan blogs Overview page at https://artisan-roasterscope.blogspot.de/p/contents.html. At one point we should write a proper blog post documenting and linking all relevant TC4/Artisan information. For example, it was new to me that you can switch digital ports via serial commands triggered from Artisan buttons. Nice!


greencardigan	#3 Posted on 10/07/2017 3:44 PM
1 1/2 Pounder Posts: 1134 Joined: November 21, 2010	I think the Artisan PID is also very good too. Maybe I just needed to have different P I D parameters set. In the Ramp/Soak example with Artisan PID I used higher values and it followed the profile almost perfectly. I'm running the roaster with no beans, so the PID parameters I'm using do not reflect normal values.


JackH	#4 Posted on 10/10/2017 9:54 AM
Administrator Posts: 1779 Joined: May 10, 2011	Brad, thanks for all your work! You get the award! ---Jack KKTO Roaster.


Justinpogge	#5 Posted on 04/27/2018 11:39 PM
Newbie Posts: 2 Joined: April 27, 2018	know were i can source a tc4?


koffeegrounds	#6 Posted on 05/02/2018 9:09 AM
Newbie Posts: 12 Joined: December 18, 2017	fantastic videos , do these controllers also regulate my blower speed ?


greencardigan	#7 Posted on 05/02/2018 6:02 PM
1 1/2 Pounder Posts: 1134 Joined: November 21, 2010	The software can do phase angle control for an AC blower or PWM control for a DC fan. However you need the an external transistor circuit to switch d DC blower. And you need an external zero cross detector and random fire3 solid state relay to control an AC blower.


Gullygossner	#8 Posted on 09/24/2020 10:54 AM
1/4 Pounder Posts: 78 Joined: January 06, 2019	Thank you for the videos showing how to setup artisan for use with the tc4, very easy to follow. I tried my first roast last night using the the background pid control and am very pleased with how the first roast went. I did run into two issues but didn't have much time to troubleshoot. 1. On my first background roast, the SV slider would move as the roast progressed but the heater slider did not move accordingly. The heater values were charted on my graph. Is this the expected behavior? 2. Once I completed the first roast, within artisan I 'selected' reset, loaded beans and then selected 'charge'. My settings within artisan are to use the tc4 onboard PID and for the PID to turn on upon selection of the charge button. The SV seems to go to the first value at charge but never progresses past the first sv of the background profile. Does the tc4 need to be unplugged and reinitied after each roast to follow a background profile? Does artisan need to be closed and reopened?


renatoa	#9 Posted on 09/24/2020 11:45 AM
Administrator Posts: 1632 Joined: September 30, 2016	If PID is checked in the TC4 dialog, then heater is controlled by Arduino, not by Artisan. Artisan send to TC4 the command, PID;SV;150 (I want 150 degrees set value), and the on board PID will compute the required power to accomplish this task. This power level is sent to Artisan via the ArduinoTC4 56 extra device, that's why it is known by Artisan and is charted. 2. The right sequence is: Reset, (optional On), then Start. When pressing Start, depending on your setup and Artisan settings, it could auto detect charge, or you have to manually press Charge, to start profile. Pressing Charge without Start do nothing. Edited by renatoa on 09/25/2020 2:24 AM


Gullygossner	#10 Posted on 09/24/2020 12:30 PM
1/4 Pounder Posts: 78 Joined: January 06, 2019	Quote renatoa wrote: If PID is checked in the TC4 dialog, then heater is controlled by Arduino, not by Artisan. Artisan send to TC4 the command, SV150 (I want 150 degrees set value), and the on board PID will compute the required power to accomplish this task. This power level is sent to Artisan via the ArduinoTC4 56 extra device, that's why it is known by Artisan and is charted. 2. The right sequence is: Reset, (optional On), then Start. When pressing Start, depending on your setup and Artisan settings, it could auto detect charge, or you have to manually press Charge, to start profile. Pressing Charge without Start do nothing. Thank you for the reply renatoa. So for issue 1 this is the expected behavior for my setup and I am fine with that, just wanted to confirm. For issue 2, I am pretty certain that is sequence I followed but I will have do some further experimentation on my next roast. I was a little baffled that it worked for the first roast but not the second roast. I ended up doing the second roast manually using the heater slider I artisan.


progen	#11 Posted on 01/27/2021 10:56 AM
Newbie Posts: 16 Joined: December 17, 2019	After 1.5 years of having the Arduino gathering dust, I finally got Artisan installed on the laptop and a TC4+ to go with it. Brad's video helped wonderfully since I'm poor with electronics.

Jump to Forum:

Similar Threads

Thread	Forum	Replies	Last Post
Heat gun bread machine roaster--how can I change container?	Heat Gun Roasting	8	03/05/2021 4:14 PM
Advice on first my roaster (in UK)	MY FIRST ROASTER	11	03/01/2021 2:26 PM
1 lb. gas fired fluid bed roaster	Fluidbed Roaster	17	03/01/2021 1:15 PM
Sandbox Smart R1 roaster	Other Roasters	7	02/14/2021 8:29 PM
Mystery new chinese drum roaster	Drum Roaster (Store Bought and Commercial)	3	02/12/2021 6:47 AM