topbanner.gif
Login
Username

Password




Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Shoutbox
You must login to post a message.

03/04/2021 9:04 PM
I have been trying Scott Rao Hario V60 pourover this week. 1:17 and blooming with 2 parts water the first 45 seconds then splitting the rest into 2 pours. A little stirring is included. We like it.

03/04/2021 11:35 AM
My brew ratio is 1:17 (exactly 59.5 g/L). That's roughly 8.5g per 5-oz cup.

02/27/2021 9:29 AM
I'm looking to hire someone to teach/help me to find the best roast profile for the 3 types of coffee that grow on my farm in nicaragua. I live in LA, but but could go anywhere in so cal with my Behmor for a roasting lesson. Please contact me if you're in

02/17/2021 7:20 PM
When your wife thinks 30 grams for a 6 cup setting is strong, you learn to drink muddy water when you are making coffee for both of you.

02/17/2021 8:32 AM
I use a rule of thumb of 60 grams per liter. 8 cups (1 liter, 32 oz) = 60 grams, 6 cups (3/4 liter, 24 oz) = 45 grams. 10 cups = 75 grams 12 cups = 90 grams

Users Online
Guests Online: 17

Members Online: 0

Total Members: 7,053
Newest Member: AJRoaster
In Memory Of Ginny
Donations

Latest Donations
Anonymous - 5.00
Anonymous - 5.00
renatoa - 2.00
JitterzZ - 2.01
renatoa - 2.00

View Thread

Who is here? 1 guest(s)
 Print Thread
Hottop Project outside the box
OldMan41
Well I bit the bullet. I ordered a data logger, probes.
Aluminum tubing, flair tool, thread tools.
Cobalt bits, more Cafiza, & fixed the space heater.
Will post install pic's as the stuff is available. Wish me luck on my guessing on what I needed.

This is my Hottop. (P-2)
Unchanged in any way. Most of what I bought to upgrade my efforts in repeatable roasts are from multiple sources.
It will take weeks to arrive.
I am resting from neck surgery...
It' amazing how soo many things affect your neck muscles.
This was somewhat an experimental device used. So NO lifting for 1 month!
I'm in agony! I'm a DOM. Not used to sitting... no that's not "dumb old man".
Though my children thought so long ago. Now I'm a SAGE.

Breaking away for a moment:
I've tried very hard to get insight from large to medium roasters across the globe.
There has been so much resistance from most. You'd think I was going to compete with them.
Buy a $300,000.00 roaster and crush them beneath my feet.
But in my persistence and pursuit of this knowledge. I feel I have extracted a few things.
But alas I don't have the tools necessary to implement it.
That is what this project is for!

Now before anyone starts telling me I should just buy the $500 upgrade for the hottop.
2 things!
First I'm without income for 6-12 weeks.
Second is everything I just bought is still required even with the upgrade from Hottop.
These were my choices of what they recommend as peripherals. (many many choices and combo's)
I will buy the upgrade but it will be awhile...

This is my first attempt at any posting, shared project, chronicle of my work.
Please don't grind me.
I just want to share and hear from others like me.
TanX!
OldMan41 attached the following image:
dsc05040.jpg

Edited by OldMan41 on 02/11/2021 12:11 PM
OldMan41
Well I decided to call Boston Stoker here in town.
Now no promises but they are looking into giving tours and possible roasting class.
Soo if if anybody is interested in attending.
Let me know... I will keep you updated as I receive info from them.
At present the location is Vandalia Ohio.
I would think the more interested would prompt them to conduct a class.
Don't know what it will cost, but that's to early to know.
Hot dog if this happens!!!!!!!!!!!!!!!!!!!smoking
JackH
I am glad you started a post.

Not all big roasters are as enthusiastic about roasting as we are. To some of them, it is just a job.

We have a good size section on the Hottop, it may give you some ideas:

https://homeroast...rum_id=122
---Jack

KKTO Roaster.
renatoa
I am afraid to say that a lot that are taught in a roasting class aimed to professionals can't be applied on HT machine, it simply has a different thermal behaviour than a pro roaster, even it tries to mimic a drum roaster.
This could be one of the source of many people disappointments, trying to use operating modes and profiles taken from internet, for machines having other heat transfer methods.
No, I don't mean HT is not a good roaster... but if you try using it controlling heat as you have read in an article written for a 5Kg Probat, then indeed you can have surprises...
Edited by renatoa on 02/10/2021 5:11 AM
OldMan41
Data logger showed up. Those are not the thermocoupler's I will be using.
Problem I have immediately is the laptop I want to use. I lost the password.
I'll have to make a ubuntu usb access to it. So I can bypass the password.
Also wait for the probes from SUZHOU.

O MY GOD! I finally Crackatoa'd the laptop password. Just to find my win 7 isn't good enough for Artisan 2.4.
Poopski! I love win 7. Have had all but 8 & 10 so far.
Dammit!
God if only I could find the UK-105 discounted I would feel better.
This bedridden crap is killin me.
Another week before I can lift a bowling ball...
OldMan41 attached the following image:
data.jpg

Edited by OldMan41 on 02/11/2021 2:18 PM
renatoa
I am still on Artisan 1.3 and don't plan to upgrade.
Me too on W7, no plan for another Windows, rather Linux. Enough to say I resist 3 years after support ceased on XP. until my motherboard crashed. I hate reinstalling.
So you can install an older version without no regrets.
I should mention that I don't use Artisan for the roast process itself.
OldMan41
Well I couldn't stand it.
I had to try the data logger. Even though I don't have the cable to hook it to the laptop.
Now in the past I was able to verify the bean temp was 20 or so degrees higher than the chamber temp.
Today I saw the temp of the beans lag by 25-35 degrees behind the chamber till 1st crack.
Then the beans caught up with the chamber.
By end of 1st crack. Beans past chamber temp by 20 degrees.
Will taste it in a couple...
Will attempt to add 2nd thermocoupler to other end this weekend.
Test it about Thursday next.
OldMan41 attached the following image:
dsc05042.jpg
OldMan41
WOW! 2 years of filth is nasty.
I jumped into temporarily adding a thermocoupler.
OldMan41 attached the following image:
dsc05046.jpg
renatoa
How are the deposits on the front glass compared with the above ?
OldMan41

Quote

renatoa wrote:

How are the deposits on the front glass compared with the above ?


Roughly identical.
I run 250-300grams.
Mostly 300.
Gonna try venting front cover more.
Gonna try vac'ing the chaff tray too.
Made a adapter for that.
OldMan41 attached the following image:
dsc05047.jpg
OldMan41
Well I need guinea pigs!
When I finish my Hottop project.
I don't want to rely on my taste buds only.
My wife smokes, is partial to pleasing me. (everything I do is great)
Soo I need others to sample my attempts at a good roast.
I would to ask the community to nominate 4 members who they believe are master roasters on the Hottop.
I would like to send samples of an attempt for 1 pot of coffee each. In turn, reply back with judgments/suggestions/questions...
It will be a month before I'm ready.
But I'm anxious to be prepared. Sitting and convalescing is tough.🧐
Please cast your votes.
OldMan41
Have a new prob.
9 pin to usb adapter showed up.
Tried to run logger software.
It can't see computer.
Running win10. Logger last ran on Win7.
Have tried drivers for logger and Artisan. Updated win10.
Tried updating ports directly...
Also have a 9pin to 15pin adapter coming Saturday.
That's what the RS232C cable is to connect to.
Soo I guess I'll try again Saturday or have to wait till I can afford the UK-105 upgrade.
thumbdown

Well data logger does not like win10. Going back to win7.
Adapter delivery is held up by snow storms...
Data logger company says I need a different cable and software.
Just shoot me now...
BBQ grill
OldMan41 attached the following image:
dsc05049.jpg

Edited by OldMan41 on 02/20/2021 10:10 AM
renatoa
What chipset is the RS232 dongle ?
You can see this in the Device Manager.
If you find this info, we can investigate more for the right driver for w10.
OldMan41
Renatoa,
Thanks but I went and reverted back to win7.
Data logger working...
Loaded up Artisan 1.3...
All is working, but data logger temps not graphing within scope.
Only showing on right side of screen on the side bar.
I'm sure it's my fault. Need to read and learn more about...
It's just that my neck hurts and I need to lie down.
Until I get the UK-105 upgrade. This is what I've got to work with.
Glad that all devices are talking to each other.
woohoo
renatoa
Graphing starts after you press Start then Charge.
OldMan41

Quote

renatoa wrote:

Graphing starts after you press Start then Charge.


Well I tried that this morning.
Now artisan says can't get id from hh506ra device.
renatoa
Reading here:
https://artisan-r...ction.html

... I found this section somewhat related to your issue:

Quote

Devices are connected to Artisan either via a an external serial/USB connector or via a RS485/USB for Modbus devices. For various reasons Artisan does not support USB HID devices. A few devices have a build in serial/USB converter and feature a direct UDB connection. However, internally they still talk a standard serial protocol and not the USB HID one. Some of those converters offer an optical isolation that helps to eliminate some ground loops between the ground of your computer and that of the device, which can lead to spikes in the roast graph. In any case you have to ensure that a corresponding driver for the device is available for your computing platform is available. There are cases were for example the meter features a FTDI chip, but the corresponding driver available from FTDI does not support that specific device unique id (most likely for some licensing reasons). So better check before purchasing!


I would contact user MaKoMo, the author of Artisan, for such specific issue help.
OldMan41
Thanks! I appreciate all the digging you did for me. Would you like some Ethiopian Yirgacheffe next week?¿?
I made some changes, dug deeper into the program, switched to another port.
Now using com4.
I will test with a roast Saturday.
Have 2 doc appointments this week.
Been feeling wishy washy lately.
Not sleeping really either.

TRUTH: I have always thought I was smart. But maybe I'm more street smart than intellectual.
For this project has really taxed me. Melted my brain.
Trying to read manuals from other countries is annoying.
Working with technical equipment that isn't plug and play is killin me.
Talking to organizations that want all your info but give you generic answers if any. SUC!
So thank you for helping me.

I booger'd it! Another probe came in & I missed drilling the perfect spot.
Twice.
1st hole was below the glass support surface.
2nd hole was in the way of the glass front mounting plate screw.
3rd hole still has the glass front mounting plate strengthening lip in the way.
It's less than a 1/16th in depth. But stopped the glass front from closing 100%.
I removed 1/4" wide of the lip.
Threaded both extra holes and put bolts in. UGLY!
$40.00 mistake.
I'll live with the bolts.
I'll test it on Saturday with my next batch.
OldMan41 attached the following images:
dsc05050.jpg dsc05057.jpg

Edited by OldMan41 on 02/23/2021 1:53 PM
renatoa
Thank you for your kind offer, but over the pond shipping will cost more than worth coffee itself. But I get degassing for free, lol...
OldMan41

Quote

renatoa wrote:

Thank you for your kind offer, but over the pond shipping will cost more than worth coffee itself. But I get degassing for free, lol...


Hmmm?
Got no guinea pigs...
Only have 1 friend, his health is so poor. I'm afraid my coffee would blow up his heart.
Family mostly drink Krups and other fru fru coffee. Or Caffeine drinks...
I just spent 43 bucs on cigars for my neighbor who has been snowplowing for me.
I used to make and ship around the world a bushing removal tool. (aware of all rates)
Send gifts to family in Germany every year. That's 100 bucs just for a 15lbs box.
I could send it to a postal service box and you could go get it later...
Don't get me started on my problem with being gassy.
Jump to Forum:

Similar Threads

Thread Forum Replies Last Post
Artisan / Hottop /macbook HotTop Roaster 9 11/12/2020 6:01 PM
Fluidbed Roaster project Fluidbed Roaster 127 11/07/2020 5:02 PM
Hottop 2k+ Light Roast Profile HotTop Roaster 9 09/21/2020 3:07 PM
Troubleshooting Hottop with TC4 +HTC fan control HotTop Roaster 1 09/20/2020 12:23 PM
First drum roaster project - ideas for drums? Drum Roasters 7 08/15/2020 10:45 AM
Homeroasters Association Logo, and all Content, Images, and Icons © 2005-2016 Homeroasters Association - Logos are the property of their respective owners.
Powered by PHP-Fusion Copyright © 2021 PHP-Fusion Inc
Released as free software without warranties under GNU Affero GPL v3
Designed with by NetriX