Thread subject:
Homeroasters - Home Roasting Coffee Community :: First Fluid Bed Attempt
Posted by wbbh on 12/05/2021 9:19 AM
#22
This is a partial list of parts used to build he roaster:
Blower:
https://www.amazo...B009Z0PDPI
Blower speed controller: Yeeco AC 110V 4000W SCR Voltage Regulator Speed Control Driver Dimming Dimmer Thermostat Governing Temperature Governor Fan Motor Controller
https://www.amazo...op?ie=UTF8
Sight Glass for Chamber:
https://www.amazo...&psc=1
8 in spool:
https://www.amazo...&psc=1
Connection to air box:
https://www.amazo...&psc=1
Clamps for connections:
https://www.amazo...&psc=1
Filter plate, bottom of the roast chamber:
https://www.amazo...&psc=1
It isn�t required but I bought a 4� to 3� reducer and two 90 degree elbows to carry the chaff to the side and possibly a cyclone separator later.
Burners:
This is a similar burner:
https://www.ebay....BMosSX-71h
The mushroom from this burner:
https://www.amazo...&psc=1
Igniter:
https://www.amazo...&psc=1
Needle valve:
https://www.amazo...&psc=1
Propane regulator assembly:
https://www.amazo...&psc=1
Long Roasting Chamber:
https://www.aliex...4c4dT9qUzi
Philmore S38 Vernier Control Knob
https://www.amazo...&psc=1
Edited by wbbh on 01/26/2023 2:11 PM