Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
You must login to post a message.

02/27/2021 9:50 AM
Questions are best asked in the forum. The posts will last longer, and will be seen the most by members. After a few more posts in the Shoutbox, the post you made will no longer be seen.... maybe you could also introduce yourself and share a little.

02/27/2021 9:29 AM
I'm looking to hire someone to teach/help me to find the best roast profile for the 3 types of coffee that grow on my farm in nicaragua. I live in LA, but but could go anywhere in so cal with my Behmor for a roasting lesson. Please contact me if you're in

02/17/2021 7:20 PM
When your wife thinks 30 grams for a 6 cup setting is strong, you learn to drink muddy water when you are making coffee for both of you.

02/17/2021 8:32 AM
I use a rule of thumb of 60 grams per liter. 8 cups (1 liter, 32 oz) = 60 grams, 6 cups (3/4 liter, 24 oz) = 45 grams. 10 cups = 75 grams 12 cups = 90 grams

02/17/2021 1:47 AM
OldMan41, depends what is "a pot"... usually is more accurate to specify the brew ratio, instead grams of coffee. The most usual is 1:15, thus 40 grams for 600 ml of water. If the 100 grams are for one liter pot, then we are talking about 1:10 ratio.

Users Online
Guests Online: 6

Members Online: 0

Total Members: 7,040
Newest Member: Thelsegse
In Memory Of Ginny

Latest Donations
Anonymous - 5.00
Anonymous - 5.00
renatoa - 2.00
JitterzZ - 2.01
renatoa - 2.00

View Thread

Who is here? 1 guest(s)
 Print Thread
need artisan help
I have artisan installed on the MAC and have a 1048_0 phidget. I have the device set up with a BT, ET and exhaust probe but I can only get BT/ET to show up. How to I use my other probes and have them read? I have gone to config>device and selected the meter as a 1048 phidget. I see the BT/ET is set up and displaying but cannot find an option to show anything else. Is it under Add Device and do I add it there? any assistance would be appreciated. I am trying to get this roaster up and running but don't want to jump ahead until I figure this out

I have the same issue.
Always learning
So I figured it out and was coming to delete the post

Go to configure device and select the meter you have. Mine was the phidget 1048.
Next select extra device and add a new. Select the phidget 1048 that ends with 23.
If your probe is in #2, name that one and click the LCD to show it. If you donít need all 4 temps, delete the name in the other slot and uncheck the LCD so it doesnít show
Thanks for updating with a fix. I guess not many here use the phidget.

KKTO Roaster.
I do. I just replaced the ET thermo with an ET thermocouple and was wondering about installing an Exhaust temp probe (how to, why to, and if it would be overkill).

One part of the equation solved. Thanks OP.
welcome to forum
Always asked myself why somebody want to know exhaust temp... Gene users have this and find it useless, lol Grin
Environment temperature is other story, though... some people commit the heresy to roast by ET alone, no need for BT Shock
So my take would be to place it somewhere to measure air around beans, as close as beans mass, but no touch.
Is THAT air that do the roast, whatever you read/hear about contact or radiant transfer.
My exhaust temp probe sits horizontal in the exhaust port at the mouth of the drum. Itís measuring the air as it is immediately leaving the chamber. My ET is high and in the back. Iím actually looking at these together to how how itís changing from point A to point B
Got to get em' hot enough to roast and that's why the ET probe is very important.
Always learning


kwrcst wrote:

So I figured it out and was coming to delete the post

Thanks for not deleting the post. Everyone can learn from this type of experience!
Jump to Forum:

Similar Threads

Thread Forum Replies Last Post
Using a TC4 with Artisan Roaster Scope Dataloggers/Controllers/Rate of Rise Meters 11 01/27/2021 10:56 AM
Modification of a Drum Air Fryer into an Artisan-controlled Coffee Roaster Building a Coffee Roaster 5 01/27/2021 7:09 AM
SOLVED: Artisan says: "Arduino could not set channels" Dataloggers/Controllers/Rate of Rise Meters 9 01/24/2021 2:14 AM
Arduino and Artisan Dataloggers/Controllers/Rate of Rise Meters 4 01/21/2021 1:07 PM
Artisan and Mastech 6514 Dataloggers/Controllers/Rate of Rise Meters 12 01/08/2021 2:52 AM
Homeroasters Association Logo, and all Content, Images, and Icons © 2005-2016 Homeroasters Association - Logos are the property of their respective owners.
Powered by PHP-Fusion Copyright © 2021 PHP-Fusion Inc
Released as free software without warranties under GNU Affero GPL v3
Designed with by NetriX