topbanner.gif
Login
Username

Password




Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Shoutbox
You must login to post a message.

02/27/2021 9:50 AM
Questions are best asked in the forum. The posts will last longer, and will be seen the most by members. After a few more posts in the Shoutbox, the post you made will no longer be seen.... maybe you could also introduce yourself and share a little.

02/27/2021 9:29 AM
I'm looking to hire someone to teach/help me to find the best roast profile for the 3 types of coffee that grow on my farm in nicaragua. I live in LA, but but could go anywhere in so cal with my Behmor for a roasting lesson. Please contact me if you're in

02/17/2021 7:20 PM
When your wife thinks 30 grams for a 6 cup setting is strong, you learn to drink muddy water when you are making coffee for both of you.

02/17/2021 8:32 AM
I use a rule of thumb of 60 grams per liter. 8 cups (1 liter, 32 oz) = 60 grams, 6 cups (3/4 liter, 24 oz) = 45 grams. 10 cups = 75 grams 12 cups = 90 grams

02/17/2021 1:47 AM
OldMan41, depends what is "a pot"... usually is more accurate to specify the brew ratio, instead grams of coffee. The most usual is 1:15, thus 40 grams for 600 ml of water. If the 100 grams are for one liter pot, then we are talking about 1:10 ratio.

Users Online
Guests Online: 12

Members Online: 0

Total Members: 7,038
Newest Member: peafarmer
In Memory Of Ginny
Donations

Latest Donations
Anonymous - 5.00
Anonymous - 5.00
renatoa - 2.00
JitterzZ - 2.01
renatoa - 2.00

View Thread

Who is here? 1 guest(s)
 Print Thread
First drum roaster project - ideas for drums?
hallgeirl
Hi all,
First time poster here, and love reading all the experiences in this forum. There's really a lot of great projects here to look up to. Kudos to all.

So I've been roasting on my heat gun + bread machine roaster for a while now, and although it works great and I get some really good roasts from it, I am longing for an actual drum roaster. This is both because I want to build something new, being able to handle a bit larger batches, and to experiment with other roast parameters like air flow and charge temperature. I'm aiming to do 1.2kg batches of greens, that's about twice the batch size I have currently.

In my head I figured it was a good idea to start with finding a drum, since that kind of will define the scale of the rest of the roaster. One goal of the project is also to keep the cost down, thus do most of the work myself, and use existing parts when possible so I don't need to have them made by someone else.

I'm reading a lot of recommendations for no less than 3mm wall thickness. Also from what I've read, the conversion rate for bean capacity in kg to drum volume in liters is about 1/6 (so a 1kg roaster would need a drum volume of 7.2 liters). Given this, I have some alternatives that may or may not work:
* I can get a hold of a 2mm x 200mm x 250mm steel pipe meant for connecting wood stoves to a chimney (200mm is the outer diameter) giving a volume of 7.7 liters. However, it's only 2mm thick.
* I got a fire extinguisher ready for retirement (I read someone used this in one of their builds on this forum). However, uncertain about the wall thickness - probably below 2mm. Also, the OD is around 150mm - that's a bit on the low side.
* I might be able to find someone to make a appropriately sized pipe needed (e.g. 3mm x 220mm x 220mm) but I suspect it wouldn't be cheap...

I'm really looking for outside insight here from those more experienced in this game than me. Some questions (feel free to answer also those I'm not asking, if I've missed some important questions):
1. Am I worrying about the right things (e.g. drum wall thickness - how important is it?)? Would the first alternative be just fine even with "just" 2mm walls?
2. Is there other good alternatives for drums for a DYI roaster?
3. One thing is the drum upper capacity, but what about the minimum load - what factors determine what the minimum load for a drum is? If I e.g. find an alternative that is 250x250mm (which should take 2kg), can that be used to roast e.g. 500g? Or should the load be closer to the max capacity?
Edited by hallgeirl on 07/16/2020 3:46 PM
oldgrumpus
My roaster is 1.5 kg capacity and I used a piece of water-well pipe. It's about 300mm in diameter but a bit thicker. I used a lathe to thin it down. I might suggest using an old propane bottle such as this:
oldgrumpus attached the following image:
propane_bottle_1.jpg

Clever Coffee Dripper
Grinder: Macap M4
Roaster: Completed drum roaster project photos shown here:
Photos https://goo.gl/ph...Da6K4wfqw5
Videos https://www.youtu...Bd1NrdpSUH
pjvdl

Quote

hallgeirl wrote:
* I got a fire extinguisher ready for retirement (I read someone used this in one of their builds on this forum). However, uncertain about the wall thickness - probably below 2mm. Also, the OD is around 150mm - that's a bit on the low side.


I'm using a re-purposed 9kg fire extinguisher. OD is 180mm and wall thickness is around 1.7mm. You will see from my other thread that I am still working through heating issues, so can't comment yet on whether this thickness will work.
-- Paul

ECM Rocket espresso
Eureka Mignon grinder
500g BBQ rotisserie roaster
1kg drum roaster
hallgeirl

Quote

oldgrumpus wrote:

My roaster is 1.5 kg capacity and I used a piece of water-well pipe. It's about 300mm in diameter but a bit thicker. I used a lathe to thin it down. I might suggest using an old propane bottle such as this:


That's interesting. I don't have access to a lathe unfortunately so if water well pipes usually are very thick walled, I guess that's probably not an option for me.
Do you know what wall thickness those propane bottles usually have? I think I can get one of those used.

Quote

pjvdl wrote:

Quote

hallgeirl wrote:
* I got a fire extinguisher ready for retirement (I read someone used this in one of their builds on this forum). However, uncertain about the wall thickness - probably below 2mm. Also, the OD is around 150mm - that's a bit on the low side.


I'm using a re-purposed 9kg fire extinguisher. OD is 180mm and wall thickness is around 1.7mm. You will see from my other thread that I am still working through heating issues, so can't comment yet on whether this thickness will work.


Nice - I'll definitely check out your thread. This is quite similar to my option #1 (using a chimney pipe segment). So if yours work, then I think that chimney pipe would work as well.
oldgrumpus
Propane bottles are not very thick. I'm guessing they are about 2mm.
Clever Coffee Dripper
Grinder: Macap M4
Roaster: Completed drum roaster project photos shown here:
Photos https://goo.gl/ph...Da6K4wfqw5
Videos https://www.youtu...Bd1NrdpSUH
JackH
People have used the larger silver fire extinguishers for roasters.

I would avoid using galvanized metals.
---Jack

KKTO Roaster.
DrHenley

Quote


I would avoid using galvanized metals.

Like the plague! LOL
--------------------------------------------------------------------------------
A morning without coffee is like a marriage without a honeymoon.
Jump to Forum:

Similar Threads

Thread Forum Replies Last Post
Advice on first my roaster (in UK) MY FIRST ROASTER 11 03/01/2021 2:26 PM
1 lb. gas fired fluid bed roaster Fluidbed Roaster 17 03/01/2021 1:15 PM
Heat gun bread machine roaster--how can I change container? Heat Gun Roasting 4 03/01/2021 4:16 AM
Hottop Project outside the box Dataloggers/Controllers/Rate of Rise Meters 21 02/27/2021 8:48 AM
Sandbox Smart R1 roaster Other Roasters 7 02/14/2021 8:29 PM
Homeroasters Association Logo, and all Content, Images, and Icons © 2005-2016 Homeroasters Association - Logos are the property of their respective owners.
Powered by PHP-Fusion Copyright © 2021 PHP-Fusion Inc
Released as free software without warranties under GNU Affero GPL v3
Designed with by NetriX