SR800/SR540 Fan C... | [78] |
Roast Color Nerdy... | [33] |
"Well tempered ro... | [33] |
Artisan Arduino P... | [27] |
Understanding the... | [27] |
Artisan doesnt follow the profile
|
|
Conqueror44 |
Posted on 12/31/2021 3:14 PM
|
![]() Newbie ![]() Posts: 5 Joined: December 31, 2021 |
Hello everyone, I was doing a small fluid bed roaster using this project; https://lukasgrasse.medium.com/how-to-make-an-arduino-controlled-coffee-roaster-f6a3334fd7d5#.4ej03nq68 with Arduino, MAX6675 Thermocouple, and a MOSFET but it seems as though although everything is wired correctly. The Artisan does not follow the uploaded profile on the background. I really do not know where I made a mistake but I'll upload my current settings. It starts as if it will go following the profile then suddenly fells off and stop working each time. Thank You for your answers. Happy happy new year to all.
Conqueror44 attached the following images:
|
|
|
timbarnes |
Posted on 12/31/2021 10:53 PM
|
![]() Newbie ![]() Posts: 38 Joined: October 25, 2021 |
I believe you need to select "Start PID on CHARGE" - this tells Artisan to track the profile. Then when you start the roast, be sure to click "CHARGE" to tell Artisan the roast has started. |
|
|
renatoa |
Posted on 01/01/2022 3:28 AM
|
![]() Administrator ![]() Posts: 2426 Joined: September 30, 2016 |
The same happens when you press On in Control dialog, from his picture it seems pressed, or at least in focus, from the appearance. What I found questionable is how insanely high the P coefficient is. The value in article is just ... for the picture... even the author mentioned the tuning importance. For FB machines I am using the value 1 always, the lowest, because the highly turbulent nature of the thermal model of these machines. The heater control driving for this machines is a business of I term, with an integration window of at least 10 seconds, as the I coefficient suggests. I am using even lower values, in the 0.06-0.08 ballpark. Apart from these strictly PID tuning considerations, please also be aware that the MAX6675 marriage with Artisan PID for a FB machine BT driven power control, is not the best match you can have... this setup could be satisfactory for measurement/logging/observe, and some manual control, but for profile following... hmmm... |
|
|
Conqueror44 |
Posted on 01/01/2022 11:57 AM
|
![]() Newbie ![]() Posts: 5 Joined: December 31, 2021 |
Thank you so much, the problem is solved now I'll check what to use as a drum :)) Waiting for your advice. |
|
|
renatoa |
Posted on 01/01/2022 3:02 PM
|
![]() Administrator ![]() Posts: 2426 Joined: September 30, 2016 |
Please, can you show us the results of the "solving". I am curious... Your problem doesn't sound as a "change a setting and rules them all"... From FB to drum... is almost other universe :) Please detail. ![]() Edited by renatoa on 01/01/2022 3:20 PM |
|
Jump to Forum: |
Thread | Forum | Replies | Last Post |
---|---|---|---|
Artisan Arduino PWM 4-20mA for Power Settings | ROASTING SOFTWARE APPS | 28 | 02/01/2023 9:21 AM |
What has changed in artisan 2.8.2 | ROASTING SOFTWARE APPS | 13 | 01/23/2023 8:20 PM |
Artisan newbie with SR800 | ROASTING SOFTWARE APPS | 5 | 12/20/2022 11:02 PM |
Artisan drop temp not right | Roasting Profiles | 4 | 12/15/2022 1:35 AM |
TC4 locks up when starting Artisan 2.8 | Dataloggers/Controllers/Rate of Rise Meters | 7 | 11/09/2022 3:04 AM |