Skywalker, the AL... | [263] |
War on Farmers by... | [53] |
Green coffee reviews | [10] |
Help and recommen... | [10] |
Want to buy SR500
|
|
8675309 |
Posted on 03/29/2023 2:12 PM
|
![]() 1/4 Pounder ![]() Posts: 102 Joined: August 02, 2018 |
My SR500 is going on the blink. I want to buy one if you have one you'd like to get rid of. The 'timer' button won't work if you know how to fix that let me know.
It's bad luck to be superstitious
|
|
|
allenb |
Posted on 03/29/2023 7:50 PM
|
Administrator ![]() Posts: 3884 Joined: February 23, 2010 |
Sorry to hear about your Freshroast timer issue! Shoot us more details on the "timer button" problem. Is it an up-down membrane button? 1/2 lb and 1 lb drum, Siemens Sirocco fluidbed, presspot, chemex, cajun biggin brewer from the backwoods of Louisiana
|
|
|
renatoa |
Posted on 03/30/2023 3:46 AM
|
![]() Administrator ![]() Posts: 3131 Joined: September 30, 2016 |
Quote Membrane on front panel, with a micro-switch underneath, soldered on PCB. Easy replacement, not SMD type. If the click is not clearly heard or sensed with the finger, probably the micro-switch is broken. The OP could be also interested into a retrofit board, concept shown here: https://homeroast...ad_id=6866 |
|
|
allenb |
Posted on 03/30/2023 7:54 AM
|
Administrator ![]() Posts: 3884 Joined: February 23, 2010 |
Another possibility is potential repair of the membrane switch if you're handy with small tools: https://kv5r.com/...e-buttons/ 1/2 lb and 1 lb drum, Siemens Sirocco fluidbed, presspot, chemex, cajun biggin brewer from the backwoods of Louisiana
|
|
|
renatoa |
Posted on 03/30/2023 8:41 AM
|
![]() Administrator ![]() Posts: 3131 Joined: September 30, 2016 |
In these roasters the buttons are of different type as in the link above. The switch is a replaceable assembly, it's a soldering job. The only challenge is to find the right button height, they are a lot of sizes, check attached. ~~~
renatoa attached the following image:
|
|
|
HarryDog |
Posted on 03/30/2023 9:10 AM
|
![]() 1/2 Pounder ![]() Posts: 356 Joined: July 20, 2022 |
I don't know if it's a membrane switch or a micro switch? If you have some old mice around you might be able to steal a good micro switch from it to use (if the right height and type). Now if the plastic membrane is broken any height switch will get you running. Gives you a chance to practice your soldering skills. Some pictures should help? |
|
|
renatoa |
Posted on 03/30/2023 3:26 PM
|
![]() Administrator ![]() Posts: 3131 Joined: September 30, 2016 |
Better than outside pictures is a description of the press attempt feeling. If no click, then switch stuck. |
|
|
HarryDog |
Posted on 03/30/2023 4:35 PM
|
![]() 1/2 Pounder ![]() Posts: 356 Joined: July 20, 2022 |
Yes for a micro switch the thin metal plate fail and stay collapsed, at least the ones I have seen. Now if it's a membrane switch they fail with a break in the trace or by turning the contacts to powder if this has that type of switch? |
|
|
8675309 |
Posted on 03/21/2024 1:06 AM
|
![]() 1/4 Pounder ![]() Posts: 102 Joined: August 02, 2018 |
Going to attempt a solder this weekend, well that is the wife will attempt it. I bought another SR500 but it won't get hotter than 440 so second crack eludes me.
It's bad luck to be superstitious
|
|
|
8675309 |
Posted on 03/30/2024 12:56 PM
|
![]() 1/4 Pounder ![]() Posts: 102 Joined: August 02, 2018 |
Quote renatoa wrote: In these roasters the buttons are of different type as in the link above. The switch is a replaceable assembly, it's a soldering job. The only challenge is to find the right button height, they are a lot of sizes, check attached. ~~~ My 'new' switch isn't the right height - it's more akin to the 6.0x6 0x4.5 size. But that doesn't matter as I can just tooth-pick the thing to push up the 'timer'. Wish I could just turn the stupid timer off I'm smart enough not to burn down the house LOL. I assume all amperage and voltage on all of these are the same - the wife asks about that. It's bad luck to be superstitious
|
|
|
Ben N |
Posted on 04/02/2024 10:24 AM
|
![]() Newbie ![]() Posts: 11 Joined: January 22, 2024 |
The amps and volts probably aren't the same, but that switch is only signaling the board, the current is miniscule. |
|
Jump to Forum: |