topbanner.gif
Login
Username

Password




Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Shoutbox
You must login to post a message.

03/04/2021 9:04 PM
I have been trying Scott Rao Hario V60 pourover this week. 1:17 and blooming with 2 parts water the first 45 seconds then splitting the rest into 2 pours. A little stirring is included. We like it.

03/04/2021 11:35 AM
My brew ratio is 1:17 (exactly 59.5 g/L). That's roughly 8.5g per 5-oz cup.

02/27/2021 9:29 AM
I'm looking to hire someone to teach/help me to find the best roast profile for the 3 types of coffee that grow on my farm in nicaragua. I live in LA, but but could go anywhere in so cal with my Behmor for a roasting lesson. Please contact me if you're in

02/17/2021 7:20 PM
When your wife thinks 30 grams for a 6 cup setting is strong, you learn to drink muddy water when you are making coffee for both of you.

02/17/2021 8:32 AM
I use a rule of thumb of 60 grams per liter. 8 cups (1 liter, 32 oz) = 60 grams, 6 cups (3/4 liter, 24 oz) = 45 grams. 10 cups = 75 grams 12 cups = 90 grams

Users Online
Guests Online: 12

Members Online: 0

Total Members: 7,043
Newest Member: tigertictac
In Memory Of Ginny
Donations

Latest Donations
Anonymous - 5.00
Anonymous - 5.00
renatoa - 2.00
JitterzZ - 2.01
renatoa - 2.00

View Thread

Who is here? 1 guest(s)
 Print Thread
fluid bed design questions
johntruax
Attached is what I have so far. A Bake-A-Round some black iron fittings a stainless steel mesh and a 1600 w heat gun element. I want to use a shop vac to float the beans for roasting but when I slide the heat gun element into the one inch tube (almost perfect fit) and test the air flow there doesn't seem to be nearly enough to move anything. Am I using the wrong element or wrong size pipe? Can you point me at the right thread to read up on this design? I have to believe someone has already done this. Thank

John
CharcoalRoaster
Nothing attached John. Was it an image or a link to an image?
johntruax
I can't seem to get the picture attached. I guess that would be my first question. Help???
JackH
Are you using the built in file attachment for the site or a file hosting site like imgur?

10MB maximum size. Make sure there are no spaces and avoid using special characters.

Allowed filetypes: .gif .jpg .png

Usually it is the filename, try renaming it to something simple.

Let me know if you are still having trouble.
---Jack

KKTO Roaster.
johntruax
I'm trying to post a picture. It's 186 KB and on my hard drive. The path described in the file post area below is C:\fakepath\jRoaster.jpg

I'm going to post this reply and see if it goes through.

John
johntruax attached the following image:
jroaster.jpg
johntruax
Hey... it worked. As you can see, I'm just getting started. I've been using modified Poppery 2's for the last 10 years or so but I would like something more reliable and that can roast more than a 1/2 to 2/3 a cup of greens per batch.

As I said before, the heat gun element fits very snugly into the 1 inch pipe but does't seem to let enough air flow through.

Can someone suggest a thread for a similar design?

John
CharcoalRoaster
Why not just eliminate the reducer and use the same size pipe as your elbow? then you should have better airflow around the element...
JitterzZ

Quote

johntruax wrote:

Hey... it worked. As you can see, I'm just getting started. I've been using modified Poppery 2's for the last 10 years or so but I would like something more reliable and that can roast more than a 1/2 to 2/3 a cup of greens per batch.

As I said before, the heat gun element fits very snugly into the 1 inch pipe but does't seem to let enough air flow through.

Can someone suggest a thread for a similar design?

John

"I used a sink drain kit and a 7'' drain elbow" https://forum.hom...post_65761
https://forum.hom...post_40354
Also, the style of element that you're using may not be appropriate. I think that this type may allow for better airflow: https://www.amazo...amp;sr=8-1
JitterzZ attached the following image:
heating_element.png

Edited by JitterzZ on 03/23/2019 11:55 AM
johntruax
The element you show would obviously let more air flow. Thanks.

John
johntruax

Quote

CharcoalRoaster wrote:

Why not just eliminate the reducer and use the same size pipe as your elbow? then you should have better airflow around the element...


easy enough to try. I'll pick some new pipe up next time I'm out. Thanks

John
JackH

Quote

johntruax wrote:

I'm trying to post a picture. It's 186 KB and on my hard drive. The path described in the file post area below is C:\fakepath\jRoaster.jpg

I'm going to post this reply and see if it goes through.

John


Don't worry about the \Fakepath. It is just something the system uses. It looks like you are able to post photos.
---Jack

KKTO Roaster.
RobS
Has anyone tried using candle chimneys you can get them in alot of sizes and they are a cheaper solution to the bake around?

thanks
JitterzZ

Quote

RobS wrote:

Has anyone tried using candle chimneys you can get them in alot of sizes and they are a cheaper solution to the bake around?

thanks

I haven't seen anyone use it as a roast chamber, but plenty of people have used them as chimneys on their popper builds. I'm currently trying to use one as a replacement for my broken SR500 RC.
JitterzZ attached the following images:
sr500_rc.png sr500_rc2.png

Edited by JitterzZ on 03/24/2019 11:48 AM
JitterzZ
My current SR500 RC is made from the larger inner stainless steel chamber of a broken HyperChiller that I had in the junk pile (HyperChiller--https://www.amazo...&psc=1). I've broken Two SR500 chambers so far. Brand new ones are not a problem for me to acquire, but why buy what I can build for free?Grin
JitterzZ attached the following images:
sr500_stainless1_1.png sr500_stainless2_1.png sr500_stainless3_1.png sr500_stainless4.png

Edited by JitterzZ on 03/24/2019 3:27 PM
JitterzZ
Ordered and received Two candle chimneys. See this post for description and link: https://forum.hom...post_68395.
As can be seen in the attached pictures, the candle chimneys are a perfect fit for a broken SR500 RC (perfect for my purposes), and also much thicker than the OEM RC. I ordered the 10" tall candle chimneys because I currently roast 140 grams of coffee in my SR500, which I intend to up to 200 grams as soon as I can make a mod for the RC which will turn it into a spouting bed. See AlanAdler's post here: http://coffeegeek...010#594010. My mod will use stainless steel instead of Teflon and be more of a funnel. Still figuring it out. I will also make a proper handle for the new RC that will cover the length of the RC with an SS band at the top. I will also build a much lighter Chaff collector to prevent tipping of the RC in the event of a bump, etc.
JitterzZ attached the following images:
sr500rc2_1.png sr500rc3.png sr500rc4.png sr500rc1.png

Edited by JitterzZ on 03/27/2019 7:05 PM
RobS
Wow those came quick glad they worked out
JitterzZ
Yep. Excited to get my spouting mod done so I can give her a test drivecross fingers
Thanks a bunch for the tip
ThumbsUp
RobS
So when they are advertised as 3 or 4 inch is that inside or outside diameter just need to know I need to find a stainless funnel for my roaster and I have not received my chimney yet

thanks
JitterzZ

Quote

RobS wrote:

So when they are advertised as 3 or 4 inch is that inside or outside diameter just need to know I need to find a stainless funnel for my roaster and I have not received my chimney yet

thanks

Mine was 3" OD (outside diameter) which I believe is the common meaning when advertising width of the glass rounds, unless otherwise specified-- for example: 3" ID (inner diameter). But just so you understand, having read the reviews of the candle chimneys that I purchased, there were complaints of inconsistencies in the sizes. I must have just gotten lucky.woohoo
Edited by JitterzZ on 03/28/2019 10:57 PM
Jump to Forum:

Similar Threads

Thread Forum Replies Last Post
1 lb. gas fired fluid bed roaster Fluidbed Roaster 17 03/01/2021 1:15 PM
Transparent Fluid Bed Design Building a Coffee Roaster 126 02/12/2021 2:14 PM
roast time questions R1 Bullet Roaster 1 02/06/2021 2:36 PM
cheap 1/2lb fluid bed roaster build Fluidbed Roaster 8 01/04/2021 3:57 PM
Aliexpress Fluid Bed roaster 300g Fluidbed Roaster (Store-Bought and Commercial) 30 12/23/2020 1:42 AM
Homeroasters Association Logo, and all Content, Images, and Icons © 2005-2016 Homeroasters Association - Logos are the property of their respective owners.
Powered by PHP-Fusion Copyright © 2021 PHP-Fusion Inc
Released as free software without warranties under GNU Affero GPL v3
Designed with by NetriX